| |
|
| Home > Technical Information > Processing Tank Installation |
Processing Tank Installation
Rinn's one gallon insulated Processing Tank can be installed using the following guidelines. Professional assistance is recommended.
- Both the water inlet and drain fittings accept standard National 3/4" pipe thread.
- The drain fitting has a male adapter to accommodate the overflow standpipe.
- Counter opening should be 13.25" square.
| Part Numbers |
Key Dimensions |
| |
| 1. 54-5002 Wash Tank |
A: 15” (381 mm) |
G: 10” (254mm) |
| 2. 54-5003 Tank Cover |
B: 13” (330mm) |
H: 14” (254mm) |
| 3. 54-5004 Insert |
C: 17 1/8” (451mm) |
I: 1 3/4” (44m) |
| 4. 54-5005 Stand Pip |
E: 15 1/8”(381mm) |
J: 9” (229mm) |
| |
F: 2” (51mm) |
|
< Back to Technical Information
|
|
|
