| |
|
| Home > Technical Information > EndoRay II Film Holder |
EndoRay II Film Holder
The EndoRay II, employing the paralleling technique, fits over endodontic files, rubber dams, and clamps and is securely held by the patient's bite. To assemble and use, follow these simple instructions:
- With a film centered in the basket (see figure at right), place the assembly over the tooth (with files and clamp) and rest it on adjacent teeth. If you are using a rubber dam, release the top or bottom half from the frame. There is no need to completely remove the rubber dam and frame. The film should be adjacent to the tooth being radiographed and behind the rubber dam. The patient should then bite lightly until the EndoRay II is secure.
- The EndoRay II is manufactured from a porous plastic material and has a limited life. It must be replaced periodically.
- For a longer-lasting instrument, always disassemble the three pieces before sterilizing.
|
 |
NOTE: The EndoRay II should be sterilized in your steam autoclave or chemiclave. Other methods of sterilization are not recommended.
< Back to Technical Information
|
|
|
